Included:
2x 30g glue
1x black plc. patch
1 x gray plc. patch
1 x white plc. patch
1 x dark blue plc. patch plc.
patch size : 3.93 x 3.93 inch
Procedures for repairing hole
(1) Exhaust the inflatable product fully, clean the air leakage area completely and remove all dirt.
(2) Take out the repair piece, pay attention that this piece of rubber shall be a couple of centimeters larger than the broken area.
(3) Apply the repair glue on the air leakage area and bottom of the repair piece evenly, don’t apply more. In total apply the glue twice, 5 minutes between each and every time. After applying the glue twice, As a way to make the glue sticky, wait for 10-15 minutes.
(4) Stick the repair piece with the glue side to the damaged area, press with blunt tool vigorously (the hair drier could be used right now, the hot wind could enhance the viscosity).
(5) Apply little glue around the repair piece after 12 hours.
(6) The repair work is completed after 24 hours. The damaged product is revitalized!
Warm tips:
1. Never let it to contact eyes or swallow it.
2. As a way to steer clear of the glue from deteriorating or volatilizing after long-time laying, use preservative film or plastic bag to cover the month after the use of each and every time, and then tighten the glue cover.
This powchful useful patch and glue can repair your inflatable boats , seats bouncer airbed and other
Can be utilized on water toys and so forth
Included: 2x 30g glue
There are no reviews yet.