Specification:
1.Titanic Aluminum Alloy housing materials 100% anti-corrosion
2.Easily replace the existing 1/2″ drain plug at the boat, no wish to drill hole on boat;
3.Simply screw into the 1/2″ threaded entry and connect wires to a switch;
4.Quick Disconnect and take away with plug in& out Water-proof connector, connected with 2 meters cable
5.Connected with Water-proof connector in an effort to easy installation, no drilling hole are needed, just screw it into the holes in your boat
6.Install for both small or large boat with DC8-28V built-in driver
Installation instruction:
1.Loosen the drain light
2.Run the cable leads thru the garboard drain opening and screw the drain plug light assembly into the existing garboard fitting .The garboard fitting is 1/2 NPT
3.Connecting the light wire to an 8-28V on/off switch. Plug within the Water-proof connector
4.Attach the red lead the positive(+) with the included in line 3 AMP assembly fuse and the black result in the negative (-)
5.Switch at the light to check if it really works well
6.Wire Connection Diagram
Packing includes:
1* Drain Plug light
1* Protective tube
Remark: Lights are for underwater use only; don’t operate it out of water
Water-proof : IP68
Single LED 3W with 9 LED insides ,total 27W super brightness
180¡ãViewing angle, Luminous Flux1800Lm
Color temperature: 6500-7500K
There are no reviews yet.