Specification:
1. Single LED 1.5W with 6 LED insides ,total 9W super brightness
2. Bronze housing materials, 100% anti-corrosion
3. Standard ¡°1/2 NPT thread type, connected with 2 meters cable
4. Connected with Water-resistant connector with the intention to easy installation, no drilling hole are needed, just screw it into the holes to your boat
5. Water-resistant : IP68
6. Connect to 12-24V battery or power sources only
7. Current working£º570MA£¬ Luminous Flux 70 Lm
Installation instruction:
1. Loosen the drain light
2. Run the cable leads thru the garboard drain opening and screw the drain plug light assembly into the existing garboard fitting.The garboard fitting is 1/2 NPT
3. Connecting the light wire to a 12-24V on/off switch. Plug within the Water-resistant connector
4. Attach the red lead the positive(+) with the included in line 3 AMP assembly fuse and the black result in the negative (-)
5. Switch at the light to check if it really works well
Packing include:
1* Drain Plug light
1* Protective tube
Remark: Lights are for underwater use only; don’t operate it out of water
AGPtek is a registered trademark safe by the USA Trademark Law. AGPtek products are sold by authorized sellers only.
There are no reviews yet.