Specification:
1. Single LED 3W with 9 LED insides ,total 27W super brightness
2. Titanic Aluminum Alloy housing materials 100% anti-corrosion
3. Easily replace the existing 1/2″” drain plug at the boat, no wish to drill hole on boat;
4. Simply screw into the 1/2″” threaded entry and connect wires to a switch;
5. Quick Disconnect and dispose of with plug in & out waterproof connector，connected with 2 meters cable
6. Connected with waterproof connector in an effort to easy installation, no drilling hole are needed, just screw it into the holes in your boat
7. Waterproof: IP68
8. Install for both small or large boat with DC8-28V built-in driver
9. 180°Viewing angle，Luminous Flux1800Lm.
10. Color temperature：6500-7500K
Installation instruction:
1. Loosen the drain light
2. Run the cable leads thru the garboard drain opening and screw the drain plug light assembly into the existing garboard fitting .The garboard fitting is 1/2 NPT
3. Connecting the light wire to an 8-28V on/off switch. Plug within the waterproof connector
4. Attach the red lead the positive(+) with the included in line 3 AMP assembly fuse and the black lead to the negative (-)
5. Switch at the light to check if it really works well
Packing includes:
1* Drain Plug light
1*protective tube
Remark:
Lights are for underwater use only; do not operate it out of water
AGPtek is a registered trademark safe by america Trademark Law. AGPtek products are sold by authorized sellers only.
Made of 27w powerful Cree LEDS; Supper Bright Beam angle:180 degree Wide Range
Voltage: DC 8V-28V Fits almost all ?” brass (Garboard type or equivalent) drains
NO DRILLING REQUIRED Easy installation, just screw it into the holes in your boat. Shockproof, waterproof, and energy saving.
Quick Disconnect and dispose of with plug in& out waterproof connector £¬connected with 2 meters cable
Packing includes:1* Drain Plug light, 1*protective tube
There are no reviews yet.