Pettit Paint Splash Zone A A-788QT

Pettit Splash Zone Compound- 2 Quart KitPettit Splash Zone is an extremely hard, abrasion and have an effect on resistant, two-part epoxy patching compound. It applies like putty to seal, fill, patch, or re-build aluminum, wood, concrete, fiberglass, and steel. It may be applied in or out of water to repair boat hulls, buoys, seawalls, docks, bridge abutments, and more. Splash Zone provides excellent protection against corrosion of metals and erosion and deterioration of concrete or wood. Splash Zone’s rock-hard surface can also be drilled, tapped, or machined.Advisable for patching and repairing damaged underwater surfaces. Not to be used in potable water.Features: Two-part multi-purpose epoxy patching and repair compound Very versatile Use above or below the waterline Excellent for underwater repairs Produces a rock-hard protective surface Provides excellent protection against corrosion of metals Stops erosion and deterioration of concrete or woodSpecifications: Number of Coats: One Coverage (to succeed in minimum dry thickness): 13 sq. ft./gal.How to ApplyHow to Apply Pettit Splash Zone Epoxy Repair CompoundSurface Preparation: Put off all dirt, oil, grease, loose paint, rust, rotted and spalling concrete, rotted wood, marine growth and other interference materials. Adhesion of Splash Zone will only be as good as the cleanliness and soundness of the surface you’re applying it to. Sandblasting is preferred. Mixing Instructions: Mix by hand or with putty knife. Wear rubber gloves if you’re sensative to epoxy or polyamide resin. Keep material and hands wet with water throughout mixing. Sccop a quanitity of one component from can by hand. Scoop out an approximately equal amount of the other component. Mix and knead material by hand until the yellow and black components have combined to make a uniform olive-green color. Apply in an instant after mixing. Application: Apply by hand. If applying to dry surfaces, periodically re-wet hands with water when applying. Spread